FIND YOUR LOCAL
To find your nearest stockist, call us today on 0845 884 7000 and let us point you in the right direction.
Contact us
AOV Mutli Zone Panel
Product Code: F/CH/AOV
 |
 |
 |
 |
| Smoke | CO | 1 Year | EEA |
| Detection | Detection | Guarantee | Conformity |
|---|
You will require an AOV multi zone panel if (for example) you have 4 floors, a window on each, and a vent for a shaft on the roof. This situation would leave you with 5 zones. Here you would use an AOV multi zone panel which will be able to open/close each zone independently. Under this condition it may be that the vent should open together with any zone that is triggered. (A roof vent will be on a smoke shaft or stairwell. Opening it together with a window will then create a chimney effect clearing smoke.) In this case you can set the AOV multi zone with zone 1 as a “master”. A simple solution that will then trigger zone 1 together with any of the zones 2 – 5. Again you would then need to add an actuator to each window/vent and either link to your existing fire system or add call points & smoke detectors to the AOV multi zone system to trigger.
- For larger systems that require more than 1 zone to trigger separately
- Independent system or intergratable panel
- Triggers via a fire panel or an independent loop
- Open or close all zones with firemans call point
- Master zone capable – 1 zone (shaft / staircase) to trigger together with any other zone(s)
- 3 Base Units – up to 5 zone, 10 zone or 15 zone
- F/CH/AOV5/A | AOV multi zone (1-5 zones) base unit 5 amp 24v (Requires 1x F/CH/AOVZ-01 for each zone)
- F/CH/AOV10/A | AOV multi zone (1-5 zones) base unit 10 amp 24v (Requires 1x F/CH/AOVZ-01 for each zone)
- F/CH/AOV10/B | AOV multi zone (6-10 zones) base unit 10 amp 24v (Requires 1x F/CH/AOVZ-01 for each zone)
- F/CH/AOV20/B | AOV multi zone (6-10 zones) base unit 20 amp 24v (Requires 1x F/CH/AOVZ-01 for each zone)
- F/CH/AOVZ-01 | AOV Zone card for multi zone control panels. (1x F/CH/AOVZ-01 is required for each working zone)
(OUTPUT OPTIONS) AOV ACTUATORS
- F/CH/ACT-301 | 24v DC 1.35 amp actuator – 300N – reach 100mm to 400mm adjustable (L-290 x W-83 x H-48mm) Requires bracket for fixing (see below)
- F/CH/ACT-501 | 24v DC 2 amp actuator – 400N – reach 800mm fixed (L-575 x W-80 x H-50mm) Requires bracket for fi xing (see below)
- F/CH/ACT-502 | 24v DC 2 amp actuator – 400N – reach 600mm fixed (L-650 x W-80 x H-50mm) Requires bracket for fi xing (see below)
- F/CH/ACT-503 | 24v DC 2 amp actuator – 400N – reach 450mm fixed (L-765 x W-80 x H-50mm) Requires bracket for fi xing (see below)
- F/CH/ACT-701 | 24v DC 1 amp actuator – 300N – reach 380mm fixed (L-473 x W-51 x H-40mm)
- F/CH/ACT-702 | 24v DC 1 amp actuator – 300N – reach 600mm fixed (L-613 x W-51 x H-40mm)
- F/CH/ACT-703 |24v DC 1 amp actuator – 300N – reach 800mm fixed (L-713 x W-51 x H-40mm)
BRACKETS FOR AOV ACTUATORS - F/CH/BRK-301 | Standard mounting bracket suitable for use with F/CH/ACT-301
- F/CH/BRK-303 | Small swivel mounting bracket suitable for use with F/CH/ACT-301
- F/CH/BRK-304 | Large swivel mounting bracket suitable for use with F/CH/ACT-301
- F/CH/BRK-502 | Standard swivel mounting bracket suitable for use with F/CH/ACT-501, F/CH/ACT-502 or F/CH/ACT-503
(INPUT OPTIONS) AOV CALL POINTS & DETECTORS
- F/CH/FVE/BGU | Smoke vent yellow break glass unit (no resistor)
- F/CHBG/S/KS | Smoke vent yellow keyswitch (2 positions) open – closed
- F/CHBG/KS/SV | Smoke vent yellow keyswitch (3 positions) automatic – open – closed
- F/CHSW/2/Y | Smoke vent yellow rocker switch (2 positions) open – closed
- F/CHSW/3/Y | Smoke vent yellow rocker switch (3 positions) automatic – open – closed
- F/CH/SLR-E3N | Smoke vent detector (non latching)
- F/CH/YBO-R/GRN | Relay base (non latching)
BATTERIES
- B/12V/7AH/SLA | 12 Volt 7Ah sealed lead acid battery (1 block) – Suitable for 1-5 amp PSUs
- B/12V/12AH/SLA | 12 Volt 12Ah sealed lead acid battery (1 block) – Suitable for 10 amp PSUs