SOLO DETECTOR TESTING
Solo Smoke Testing
Functional checking is accomplished by introducing a smoke, or simulated smoke, stimulus from the protected area through the vents of a detector to the sensor(s). It is required by all national standards around the world and testing by electronic means that do not involve this test is not sufficient to comply.
Review the full range of Solo Smoke Testing equipment here.
Solo – Heat Testing
Functional checking of heat detectors, with a genuine heat source, is now required by major national standards around the world. Testing with heat sources not designed for the purpose can be both dangerous and damaging. The Solo range of heat detector testing equipment is designed specifically for purpose and provides a professional solution.
Review the full range of Solo Heat Testing equipment here.
Solo – CO Testing
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and / or heat. Under international codes and standards the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor. Solo CO — used in conjunction with Solo 330 / 332 dispensers – provides a safe way of achieving this with CO concentration levels high enough to activate an alarm, but low enough not to pose danger to user health.
Review the full range of Solo CO Testing equipment here.
Solo – Removal and Cleaning
Detectors need removal and replacement for various reasons. The vast majority are fitted on bayonet mountings and the task can be done using specialist tools fitted to appropriate access poles. Using such specialist devices saves the time, cost, disruption and risk to safety that ladders, scaffolding or access gear represents.
Faced with a vast array of different models shapes and sizes the professional needs a universal tool. Compatible with an astonishingly wide range of detectors, the colour-coded heads of the Solo 200 rotate to provide a combination of sizes and settings for just about every detector.
Solo – Telescopic Poles
Solo Telescopic Poles are required for detectors out of normal reach. Their use saves the time, cost, disruption and risk to safety that ladders, scaffolding or access gear represents.
Solo – Testing Kits
The contents of each Testing Kit are determined according to your individual testing needs – see the next page for our Kit Selector and Product Range Selector to help you choose the solution right for you.
Solo – Accessories
Solo Detector Testers provide a full range of testing and maintenance equipment for your fire detection and alarm systems.
View Solo Accessories here.